John Deere 2120

On certain side-by-side UTVs, the owner's manual is missing information for how a person can contact Transport Canada to report a safety concern. Canadian regulations require all companies to provide this information in the owner's manual.

On certain side-by-side UTVs, the owner's manual is missing information for how a person can contact Transport Canada to report a safety concern. Canadian regulations require all companies to provide this information in the owner's manual.

On certain side-by-side UTVs, the owner's manual is missing information for how a person can contact Transport Canada to report a safety concern. Canadian regulations require all companies to provide this information in the owner's manual.

Scaffold record for tractor recall ingestion. Replace with a real safety notice source when available.

This recall involves 1023E, 1025R and 2025R Compact Utility Tractors with the model number and "John Deere" printed on the hood. The recalled tractors are green and yellow, and were sold with both opened and closed operator stations. The serial numbers of tractors included in this recall can be found at www.deere.com. Click on "Parts & Service" and scroll to "Recall" or go to www.deere.com/en/parts-and-service/recall-information/. The serial number is located on the frame, on the front right side of the tractor, near the engine.

Engine temperature climbed very high within 20 minutes of mowing, causing tractor to shut down and fail to start. Issue persisted after flushing radiator, changing thermostat, rebuilding radiator, replacing water pump, radiator cap, and belt.

Tractor overheating during initial runs of the season. Thermostat replacement did not resolve the issue, indicating probable water pump failure. User reported hearing a rattle/dry noise when first starting the tractor, potentially an early indicator of water pump degradation.

Small leak detected on lift pump body and engine block interface. User suspects air ingress into fuel system at low idle when engine is hot may be contributing to idle issues.

When using only the foot pedal, the hand throttle lever becomes engaged and RPMs increase. User must manually push the lever up to disengage it. Issue developed after initial purchase. User has lubricated components and attempted manual reset without resolution.

After running at PTO speed for extended periods, when throttle is reduced to idle, engine will not maintain idle and requires throttle adjustment until engine cools sufficiently. Issue occurs when engine is hot.